I believe that most users are usingpin transformerThe input and output leads are carefully distinguished and connected in accordance with the correct wiring method. However, it is inevitable that careless users will make mistakes in wiring and connect the leads incorrectly. Tell everyone the consequences of wrong pin transformer wiring.
There are usually two cases where the ring wire is connected incorrectly. One is that the input and output leads are reversed, and the other is that the output terminals of the multi-winding output leads are not connected correctly.
(1) The reverse connection of input and output wires has two consequences. One is to burn the transformer, the other is not much impact. For the second effect, the premise is that the input voltage cannot be too high, if the input voltage is too high,pin transformerIt will burn. It can also be boosted. The input is connected to a 12V voltage and the output is 220V, which means it can be reversed within the current range that the wire can withstand.
(2) If the output terminal of the multi-winding output lead is reversed, the device will of course not operate normally. If the connected equipment cannot withstand excessive current, the mechanical equipment will be burned out.
Conventional transformer manufacturers will be in.pin transformerThe front of the is clearly labeled so that everyone can easily identify the input and output leads. Users must carefully read the instructions on the label when using a pin transformer, especially for more windings. Identify inputs and outputsInterface. Although conventional pin transformers are connected with red and black wires, not allpin transformerAll are connected with red line input and black line. This is a point that users must pay special attention to when wiring..
Presentation here todaypin transformerThe consequences of the wrong connection of the lead, I hope to help everyone. If you have any questions or would like to know more about it, please feel free to contact our online customer service staff.